Why planned maintenance pays
Most pump failures give warning signs first: a new noise, a little heat, a slow leak. Operators who check regularly spot these early, when a fix means a seal or bearing rather than a rebuilt pump and days without water.
Every day or every shift
A walk-round takes a few minutes:
- Listen for grinding, knocking or a change in sound
- Look for leaks at the shaft seal and pipe joints
- Feel for unusual heat or vibration on the bearing housings and motor
- Check pressure and flow against what is normal for the pump
Every month
- Clean strainers and filters
- Check lubrication levels and top up as specified by the manufacturer
- Inspect guards, couplings, mounting bolts and pipe supports
- Record motor current: a rising trend is an early warning
Every year, or as recommended
Arrange a proper inspection: check shaft alignment, seal condition, impeller and wear-ring wear, and bearing condition. Condition monitoring and laser alignment find developing faults before they stop production. Worn mechanical seals can be refurbished instead of replaced.
Let us look after it
Southern Cross offers condition monitoring, seal refurbishment and Maintenance and Repair Contracts (MARC) from our service centres in Port Moresby and Lae, with crews who travel to sites across PNG. Ask us about a programme for your equipment.
General guidance only. Figures are illustrations; always confirm sizing and design with a qualified engineer for your site. Contact us for a site-specific recommendation.



