Skip to content

Tanks · 4 min read

How big should a water storage tank be?

A simple way to size storage for a village, camp, building or plant, and what to add for fire protection.

How big should a water storage tank be?

Start with daily demand

Tank size starts with how much water you use in a day. For a community or camp that is the number of people multiplied by the daily allowance per person. For a process or building it is the total of every use: drinking, washing, cooling, processing and cleaning.

Use the allowance given by your engineer or the standard that applies to your facility. Hospitals, kitchens and camps all differ, so there is no single figure that fits every site.

Decide how many days of storage you need

Storage is your buffer. It covers pump breakdowns, power interruptions, supply that arrives only part of the day and maintenance shutdowns. The more remote the site, or the harder it is to get a repair crew there, the more days of storage make sense.

  • Reliable town supply and a nearby service centre: often one day or less
  • Bore or river supply with a power-dependent pump: usually two to three days
  • Remote sites where repairs take time: more, based on how long an outage could last

Add a fire reserve if the building needs one

If the building or plant needs fire protection, the fire-water volume is added on top of the daily storage, or held in a dedicated fire tank. The required volume comes from the fire engineer's design and local rules, so confirm it before ordering.

A worked example (for illustration only)

A camp of 200 people using 150 litres each per day needs 30,000 litres (30 KL) a day. For two days of storage that is 60 KL. A separate fire reserve, if required, is added to that. Always check the numbers with your engineer.

Think about the site, not just the volume

Tanks in Papua New Guinea must be designed for local seismic conditions, and the foundation, stand height and access for assembly all affect the final design. Southern Cross tanks are supplied in crated panels for remote delivery and certified by registered PNG engineers for each site. Tell us your demand and location and we will propose a size and layout.

General guidance only. Figures are illustrations; always confirm sizing and design with a qualified engineer for your site. Contact us for a site-specific recommendation.

Request a quote.

Send an enquiry through this website and our sales team will be in touch within 24 hours.

We reply within 24 hours.

Port Moresby

Sec 62 Lot 16 Ruta Place, GordonsPort Moresby, Papua New Guinea

+675 325 4380WhatsApp (opens in a new tab)

Lae

Sec 35 Lot 28 Milfordhaven Road, ErikuLae, Papua New Guinea

+675 472 6562WhatsApp (opens in a new tab)